YZG/FZG Series Automatic Cylindrical Vacuum Drying Equipment For Food
PRODUCT SHOW
Pure water has a maximum speed at which vaporization Boiling state. Under normal conditions, about 100 ℃ when the water began to Boiling. And in vacuum conditions, due to the system of water vapor partial pressure of water vapor partial pressure far below the surface of the material, the boiling point of water is less than 100 ℃. For example: the surface down to -0.07MPa, water starts at 70 ℃ Boiling. So, although at a lower operating temperature of the dryer is still a large drying capacity.
Principle
Vacuum drying is to put raw material under the state of vacuum for heating and drying. If use vacuum to pump air and humidity out, the dry speed will be faster.
Note: if use condenser, the solvent in raw material can be recovered. If the solvent is water, condenser might be canceled and the investment and every could be saved. it use SK series water ring vacuum pump sets, condensate can not be used and the investment could be saved .
Features
1) can get a higher rate of drying at lower temperatures, the heat of the full.
2) suitable for low-temperature drying, drying heat-sensitive materials, the fear of an oxide material drying.
3) Drying can contain solvents and solvent to be recovered materials.
4) can be disinfected before drying process, drying process without any impurities mixed.
5) This dryer is a static vacuum dryer, so the shape of the dried material will not be damaged.
6) This dryer is a batch production equipment, ready to adjust the process.
7) inside the top of the arch, can effectively avoid the anti-condensate drip phenomenon.
8) four-point-one vacuum pump structure to ensure uniformity of dried material.
Technical parameters
| Inner Size mm | φ600*976 | φ1000*1527 | 1500*1060*1220 | 1500*1800*1220 |
| Outer Size mm | 1135*810*1020 | 1693*1190*1500 | 1924*1720*1513 | 1924*2500*1513 |
| layers of baking | 4 | 6 | 5 | 12 |
| Interval mm | 81 | 102 | 122 | 122 |
| size of baking tray mm | 310*600*45 | 520*410*45 | 460*640*45 | 460*640*45 |
| Temp | 35-150 | 35-150 | 35-150 | 35-150 |
| weight | 250 | 800 | 1400 | 3200 |
Note: The above data is for reference only. If having special requirements, the factory can provide the service of consultation and design.
Pre-service:
As a good and rich experience supplier, we should offer customer the best quality and best price of the machine.
1. Introduce the suitable product to the customer in detail, answer the question raised by customer carefully.
2. Make the suitabe project as the customer requirement and make sure the machine is suitable for the material.
Sale service:
(1). Ensure product with high quality and pre-commissioning before delivery. (2). Delivery on time. (3). Provide full set of documents as customer’s requirements.
After-sale service:
Provide considerate services to minimize clients’ worries.
1. Assist clients to prepare for the first construction scheme.
2. Install and debug the equipment.
3. Train the first-line operators.
4. Examine the equipment.
5. Take initiative to eliminate the troubles rapidly.
6. Provide technical support.
7. Establish long-term and friendly relationship.
Service commitment:
1. Provide clients one-year warranty to make sure the machine work well.
2. We always keep certain inventory level of spare parts, which means the replacements can be sent to you timely.
3. Send every client a preferential quotation.
Product Tags:
|
|
Stainless Steel 4layers Cylindrical Vacuum Drying Machine For Food 250-3200kg Images
|
